EN
CN
Fluorescent (UV) Chamber
Product description
Specifications
Download
Meet the UV preconditioning test requirements specified in the 4.10 clause of the IEC 61215-2016 standard and the standard MST54 of the IEC 61730-2016 standard. Specially designed UV metal halide lamps are used to test of photovoltaic products and materials.
l The temperature of the environmental chamber is controlled by forced air-cooling, with over-temperature and low-temperature alarm functions. The surface temperature of modules can be tracked and recorded.
l Fluorescent UV lamp with full UV spectrum.
l During the test, the UV irradiance data can be tracked. After the irradiation reaches the requirement, the test can be stopped automatically.
l It can record UV irradiance, UV radiation, and module power. All data can be exported to EXCEL table, which is convenient for data analysis and comparison. Temperature and irradiance data are automatically stored in the hard disk and can be permanently saved. The number of the test sample can be input during recording, and the data file automatically generated and can be saved.
l Can test the radiation uniformity of the irradiated surface.
Project | Parameters |
Uniformity of irradiation surface | 15% |
Spectral range | ≥280nm |
（280nm-400nm）UV irradiance | 50W/㎡ |
UVB ratio | 3%～10% |
UVA Irradiometer Range | 0～300W/m2； |
UVA radiation meter accuracy | ±2% |
UVB Irradiometer Range | 0～50W/m2； |
UVB radiation meter accuracy | ±2% |
Temperature inside the chamber | 60±5℃ |
Temperature accuracy | ±1℃ |
Temperature repeatability | ±0.5℃ |
- File name Release date Ooperating
- IEC 61730-2016 2018-04-16 Download
- IEC 61730-2016 2018-04-16 Download
- IEC 61215-2016 2018-04-16 Download
